Stove Fitting Kit (platform, double walled flue pipe section and flashing bundle)

Save money by buying these essential parts together to fit your stove safely in your bell tent or glawning.

1 x silicon flashing kit to fit your stove flue snugly through your pre-cut stove jack

1 x stove platform to put your stove on top of to give the flooring protection

1 x 60mm double walled flue pipe section to protect your flashing kit from excessive heats (80mm sections are available, just contact us to request the change)

Please follow instructional video carefully here for fitting

Safety Disclaimer PLEASE READ

We design high-quality tent stove products however, for safety, they must be used in accordance with the instructions provided. If used in a tent which is not fire-retardant, the stoves should only be used through a stove hole cut into a fire-retardant panel on the tent. We also recommend a suitable silicone tent flashing kit. When used on a fire-retardant tent, the stove should be flued out through a silicone flashing kit. It is the customer’s responsibility to ensure that the product is being used safely. If you have any concerns about how the stove should be used, please contact us. Lit stoves should not be left unattended, and fires should be extinguished prior to sleeping. Stoves should not be used in extreme weather, particularly in high winds. Always make sure the stove is on top of something fire retardant. We do not accept any liability for loss or damage incurred by use of the stove howsoever caused (although, in accordance with legal requirements, we do not exclude liability for death or personal injury caused by our negligence). Please exercise caution and common sense by following these rules:

1. Keep the inside of the tent well ventilated, even in winter
2. Make sure the flue is clean and free of obstruction, and only ever use a stove inside a tent if the smoke and fumes are properly flued out.
3. Use a carbon monoxide alarm 
4. Set up the tent on the flat ground to make sure the tent is stable and firm. Build the stove on the flat ground to ensure the stove is stable.
5. Only use good quality wood, such as kiln dried hardwood. Do not use tanalised or treated wood, offcuts or wrapped “easy burn” firelogs